Serwowzmacniacz

Serwonapędy AC MELSERVO Seria MELSERVO-J5

Kompatybilny z CC-Link IE TSN oraz interfejsami ogólnego zastosowania.

Opis techniczny

Servo amplifier model MR-J5-_(-RJ)					MR-J5-10G	MR-J5-20G	MR-J5-40G	MR-J5-60G	MR-J5-70G	MR-J5-100G	MR-J5-200G	MR-J5-350G
Output	Voltage				3-phase 0 V AC to 240 V AC
Output	Rated current[A]				1.3	1.8	2.8	3.2	5.8	6.0	11.0	17.0
Main circuit power supply input	Voltage/ frequency ¹			AC input	3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz					3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz ⁷		3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency ¹			DC input ⁸	283 V DC to 340 V DC
	Rated current ⁶[A]				0.9	1.5	2.6	3.2	3.8	5.0	10.5	16.0
	Permissible voltage fluctuation			AC input	3-phase or 1-phase 170 V AC to 264 V AC					3-phase or 1-phase 170 V AC to 264 V AC ⁷		3-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation			DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation				±5 % maximum
Control circuit power supply input	Voltage/ frequency			AC input	1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency			DC input ⁸	283 V DC to 340 V DC
	Rated current[A]				0.2
	Permissible voltage fluctuation			AC input	1-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation			DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation				±5 % maximum
	Power consumption[W]				30
Interface power supply					24 V DC ± 10 % (required current capacity: 0.3 A (including CN8 connector signals))
Control method					Sine-wave PWM control/current control method
Permissible regenerative power of the built-in regenerative resistor ^2,3[W]					–	10			30		100
Dynamic brake ⁴					Built-in
CC-Link IE TSN			Communication cycle ¹⁰		31.25 μs, 62.5 μs, 125 μs, 250 μs, 500 μs, 1 ms, 2 ms, 4 ms
CC-Link IE TSN			Authentication class		Class B
Communication function			USB		Connect a personal computer (MR Configurator2 compatible)
Encoder output pulse					Compatible (A/B/Z-phase pulse)
Analog monitor					2 channels
Servo functions					Advanced vibration suppression control II, adaptive filter II, robust filter, quick tuning, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function (including failure prediction), power monitoring function, lost motion compensation function
Protective functions					Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection , error excessive protection, magnetic pole detection protection, linear servo control fault protection
Functional safety					STO (IEC/EN 61800-5-2)
Safety performance		Standards certified by CB ⁹			EN ISO 13849-1:2015 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2
		Response performance			8 ms or less (STO input OFF –> energy shut-off)
		Test pulse input (STO) ⁵			Test pulse interval: 1 Hz to 25 Hz, test pulse off time: 1 ms maximum
		Mean time to dangerous failure (MTTFd)			MTTFd ≥ 100 [years] (314a)
		Diagnostic coverage (DC)			DC = Medium, 97.6 [%]
		Probability of dangerous Failure per Hour (PFH)			PFH = 6.4 × 10-9 [1/h]
Structure (IP rating)					Natural cooling, open (IP20)				Force cooling, open (IP20)
Close mounting	3-phase power supply input				Possible ¹¹
Close mounting	1-phase power supply input				Possible ¹¹					Not possible		–
Mass[kg]					0.8			1.0	1.4		2.2

Rated output and speed of a rotary servo motor and a direct drive motor; and continuous thrust and maximum speed of a linear servo motor are applicable when the servo amplifier is operated within the specified power supply voltage and frequency.
Select the most suitable regenerative option for your system with our drive system sizing software Motorizer.
Refer to “Regenerative Option” in this catalog for the permissible regenerative power [W] when a regenerative option is used.
When using the dynamic brake, refer to “MR-J5 User’s Manual” for the permissible load to motor inertia ratio and the permissible load to mass ratio.
The test pulse is a signal for the external circuit to perform self-diagnosis by turning off the signals to the servo amplifier instantaneously at regular intervals.
This value is applicable when a 3-phase power supply is used.
When a 1-phase 200 V AC to 240 V AC power supply is used, use the servo amplifiers at 75 % or less of the effective load ratio.
For a connection example of power supply circuit with DC input, refer to “MR-J5 User’s Manual”.
The safety level depends on the setting value of [Pr. PF18 STO diagnosis error detection time] and whether or not STO input diagnosis is performed by TOFB output.Refer to “MR-J5 User’s Manual” for details.
The command communication cycle depends on the controller specifications and the number of axes connected.
When the servo amplifiers are closely mounted, keep the ambient temperature within 0 °C to 45 °C, or use the servo amplifiers at 75 % or less of the effective load ratio.

Servo amplifier model				MR-J5W2-22G	MR-J5W2-44G	MR-J5W2-77G	MR-J5W2-1010G
Output	Voltage			3-phase 0 V AC to 240 V AC
Output	Rated current (each axis)[A]			1.8	2.8	5.8	6.0
Main circuit power supply input	Voltage/ frequency ¹		AC input	3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz			3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency ¹		DC input ⁸	283 V DC to 340 V DC
	Rated current ⁶[A]			2.9	5.2	7.5	9.8
	Permissible voltage fluctuation		AC input	3-phase or 1-phase 170 V AC to 264 V AC			3-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
Control circuit power supply input	Voltage/ frequency		AC input	1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency		DC input ⁸	283 V DC to 340 V DC
	Rated current[A]			0.4
	Permissible voltage fluctuation		AC input	1-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
	Power consumption[W]			55
Interface power supply				24 V DC ± 10 % (required current capacity: 0.35 A (including CN8 connector signals))
Control method				Sine-wave PWM control/current control method
Permissible regenerative power of the built-in regenerative resistor ^2,3[W]				20		100
Dynamic brake ⁴				Built-in
CC-Link IE TSN		Communication cycle ⁵		62.5 μs, 125 μs, 250 μs, 500 μs, 1 ms, 2 ms, 4 ms
CC-Link IE TSN		Authentication class		Class B
Communication function		USB		Connect a personal computer (MR Configurator2 compatible)
Encoder output pulse				Compatible (A/B-phase pulse) ⁹
Analog monitor				2 channels
Servo functions				Advanced vibration suppression control II, adaptive filter II, robust filter, quick tuning, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function (including failure prediction), power monitoring function, lost motion compensation function
Protective functions				Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Structure (IP rating)				Natural cooling, open (IP20)	Force cooling, open (IP20)
Close mounting				Possible ⁷
Mass[kg]				1.5		1.9

Rated output and speed of a rotary servo motor and a direct drive motor; and continuous thrust and maximum speed of a linear servo motor are applicable when the servo amplifier is operated within the specified power supply voltage and frequency.
Select the most suitable regenerative option for your system with our drive system sizing software Motorizer.
Refer to “Regenerative Option” in this catalog for the permissible regenerative power [W] when a regenerative option is used.
When using the dynamic brake, refer to “MR-J5 User’s Manual” for the permissible load to motor inertia ratio and the permissible load to mass ratio.
The command communication cycle depends on the controller specifications and the number of axes connected.
This value is applicable when a 3-phase power supply is used.
When the servo amplifiers are closely mounted, keep the ambient temperature within 0 °C to 45 °C, or use the servo amplifiers at 75 % or less of the effective load ratio.
For a connection example of power supply circuit with DC input, refer to “MR-J5 User’s Manual”.
A/B-phase pulses are not output at a communication cycle of 62.5 μs.

Servo amplifier model				MR-J5W3-222G	MR-J5W3-444G
Output	Voltage			3-phase 0 V AC to 240 V AC
Output	Rated current (each axis)[A]			1.8	2.8
Main circuit power supply input	Voltage/ frequency ¹		AC input	3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency ¹		DC input ⁸	283 V DC to 340 V DC
	Rated current ⁶[A]			4.3	7.8
	Permissible voltage fluctuation		AC input	3-phase or 1-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
Control circuit power supply input	Voltage/ frequency		AC input	1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency		DC input ⁸	283 V DC to 340 V DC
	Rated current[A]			0.4
	Permissible voltage fluctuation		AC input	1-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
	Power consumption[W]			55
Interface power supply				24 V DC ± 10 % (required current capacity: 0.45 A (including CN8 connector signals))
Control method				Sine-wave PWM control/current control method
Permissible regenerative power of the built-in regenerative resistor ^{2 3}[W]				30
Dynamic brake ⁴				Built-in
CC-Link IE TSN		Communication cycle ⁵		125 μs, 250 μs, 500 μs, 1 ms, 2 ms, 4 ms
CC-Link IE TSN		Authentication class		Class B
Communication function		USB		Connect a personal computer (MR Configurator2 compatible)
Encoder output pulse				Compatible only with A-axis and B-axis (A/B-phase pulse) ⁹
Analog monitor				2 channels
Servo functions				Advanced vibration suppression control II, adaptive filter II, robust filter, quick tuning, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function (including failure prediction), power monitoring function, lost motion compensation function
Protective functions				Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Structure (IP rating)				Force cooling, open (IP20)
Close mounting				Possible ⁷
Mass[kg]				1.8

Rated output and speed of a rotary servo motor and a direct drive motor; and continuous thrust and maximum speed of a linear servo motor are applicable when the servo amplifier is operated within the specified power supply voltage and frequency.
Select the most suitable regenerative option for your system with our drive system sizing software Motorizer.
Refer to “Regenerative Option” in this catalog for the permissible regenerative power [W] when a regenerative option is used.
When using the dynamic brake, refer to “MR-J5 User’s Manual” for the permissible load to motor inertia ratio and the permissible load to mass ratio.
The command communication cycle depends on the controller specifications and the number of axes connected.
This value is applicable when a 3-phase power supply is used.
When the servo amplifiers are closely mounted, keep the ambient temperature within 0 °C to 45 °C, or use the servo amplifiers at 75 % or less of the effective load ratio.
For a connection example of power supply circuit with DC input, refer to “MR-J5 User’s Manual”.
A/B-phase pulses are not output at a communication cycle of 125 μs.

Servo amplifier model MR-J5-_(-RJ)				MR-J5-10A	MR-J5-20A	MR-J5-40A	MR-J5-60A	MR-J5-70A	MR-J5-100A	MR-J5-200A	MR-J5-350A
Output	Voltage			3-phase 0 V AC to 240 V AC
Output	Rated current[A]			1.3	1.8	2.8	3.2	5.8	6.0	11.0	17.0
Main circuit power supply input	Voltage/ frequency ¹		AC input	3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz					3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz ⁷		3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency ¹		DC input ⁸	283 V DC to 340 V DC
	Rated current ⁶[A]			0.9	1.5	2.6	3.2	3.8	5.0	10.5	16.0
	Permissible voltage fluctuation		AC input	3-phase or 1-phase 170 V AC to 264 V AC					3-phase or 1-phase 170 V AC to 264 V AC ⁷		3-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
Control circuit power supply input	Voltage/ frequency		AC input	1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Voltage/ frequency		DC input ⁸	283 V DC to 340 V DC
	Rated current[A]			0.2
	Permissible voltage fluctuation		AC input	1-phase 170 V AC to 264 V AC
	Permissible voltage fluctuation		DC input ⁸	241 V DC to 374 V DC
	Permissible frequency fluctuation			±5 % maximum
	Power consumption[W]			30
Interface power supply				24 V DC ± 10 % (required current capacity: 0.5 A (including CN8 connector signals))
Control method				Sine-wave PWM control/current control method
Permissible regenerative power of the built-in regenerative resistor ^{2, 3}[W]				–	10			30		100
Dynamic brake ⁴				Built-in
Communication functionUSB				Connect a personal computer (MR Configurator2 compatible)
Encoder output pulse				Compatible (A/B/Z-phase pulse)
Analog monitor				2 channels
Position control mode		Maximum input pulse frequency		4 Mpulses/s (when using differential receiver), 200 kpulses/s (when using open collector)
		Positioning feedback pulse		Encoder resolution: 26 bits
		Command pulse multiplying factor		Electronic gear A/B multiple, A: 1 to 2147483647, B: 1 to 2147483647, 1/10 < A/B < 64000
		In-position range setting		0 pulse to ±16777215 pulses (command pulse unit)
		Error excessive		±3 rotations
		Torque limit		Set by servo parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Speed control mode		Speed control range		Analog speed command 1:2000, internal speed command 1:5000
		Analog speed command input		0 V DC to ±10 V DC/rated speed (Speed at 10 V is changeable with [Pr. PC12].)
		Speed fluctuation rate		±0.01 % maximum (load fluctuation: 0 % to 100 %), 0 % (power fluctuation: ±10 %) ±0.2 % maximum (ambient temperature: 25 °C ± 10 °C) only when using analog speed command
		Torque limit		Set by servo parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Torque control mode		Analog torque command input		0 V DC to ±8 V DC/maximum torque (input impedance: 10 kΩ to 12 kΩ)
Torque control mode		Speed limit		Set by servo parameters or external analog input (0 V DC to ± 10 V DC/rated speed)
Servo functions				Advanced vibration suppression control II, adaptive filter II, robust filter, quick tuning, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function (including failure prediction), power monitoring function, lost motion compensation function
Protective functions				Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Functional safety				STO (IEC/EN 61800-5-2)

Rated output and speed of a rotary servo motor and a direct drive motor; and continuous thrust and maximum speed of a linear servo motor are applicable when the servo amplifier is operated within the specified power supply voltage and frequency.
Select the most suitable regenerative option for your system with our drive system sizing software Motorizer.
Refer to “Regenerative Option” in this catalog for the permissible regenerative power [W] when a regenerative option is used.
When using the dynamic brake, refer to “MR-J5 User’s Manual” for the permissible load to motor inertia ratio and the permissible load to mass ratio.
The test pulse is a signal for the external circuit to perform self-diagnosis by turning off the signals to the servo amplifier instantaneously at regular intervals.
This value is applicable when a 3-phase power supply is used.
When a 1-phase 200 V AC to 240 V AC power supply is used, use the servo amplifiers at 75 % or less of the effective load ratio.
For a connection example of power supply circuit with DC input, refer to “MR-J5 User’s Manual”.
The safety level depends on the setting value of [Pr. PF18 STO diagnosis error detection time] and whether or not STO input diagnosis is performed by TOFB output.Refer to “MR-J5 User’s Manual” for details.

Skontaktuj się z nami

Serwowzmacniacz

Kontakt